
Last Updated: November 4, 2026
Quick Summary
Block paving can take heavy vehicles, but only when the layers beneath it are built to carry the load. The surface rarely fails first; failure usually starts in a sub-base that is too thin, poorly compacted or waterlogged. Homeowners planning for vans, motorhomes or trailers should design for those loads from the start.
- Thicker blocks spread wheel loads over a larger area and resist cracking better.
- 80mm blocks are commonly specified for driveways with regular van or light vehicle traffic.
- Subsidence is the most common reason block paving sinks or ruts under heavy use.
- A properly compacted sub-base with adequate well-graded aggregate and good drainage is the main defence.
- Clay soils hold water, so a free-draining base reduces the risk of movement.
Table of Contents
- Can Block Paving Really Take Heavy Vehicles?
- 80mm Block Paving for Driveways: When It Makes Sense
- Driveway Sub-Base Requirements for Heavy Vehicles and Preventing Block Paving Subsidence
- Frequently Asked Questions
Can Block Paving Really Take Heavy Vehicles?
Block paving can take heavy vehicles, but only when the layers beneath it are built to carry the load. The surface itself rarely fails first. Failure usually starts underneath, in a sub-base that is too thin, poorly compacted or waterlogged. Homeowners in Norfolk who plan a driveway for a van, a motorhome or a trailer should design for those loads from the start, rather than hoping a standard car driveway will cope. A specialist team offering Driveway paving can assess the ground conditions and specify the right construction before any blocks go down.

80mm Block Paving for Driveways: When It Makes Sense
Thicker blocks spread wheel loads over a larger area and resist cracking better than thinner ones. 80mm blocks are commonly specified for driveways that see regular van or light vehicle traffic. Our block paving driveway guide compares costs, maintenance, durability and resale value to help you judge whether it is the right investment. The block thickness matters less than the interlocking pattern, the sub-base beneath it and the quality of the jointing sand. Our guide to laying block paving on sand covers sand types, bedding thickness, preparation steps and the common mistakes to avoid.
Driveway Sub-Base Requirements for Heavy Vehicles and Preventing Block Paving Subsidence
Subsidence is the most common reason block paving sinks or rutts under heavy use. Our guide to driveway sinking causes sets out the usual reasons settling happens so you can diagnose your own drive. A properly compacted sub-base, with adequate depth of well-graded aggregate and good drainage, is the main defence. Our step-by-step sub-base guide walks you through preparing one that will carry heavy vehicles. Clay soils hold water, so a free-draining base reduces the risk of movement. Our clay soil driveway guide explains the drainage, sub-base and geotextile measures that stop a driveway sinking under weight. For specific guidance on preparing a base that will carry vehicle loads, see Concrete Block Paving guidance from the Interpave trade association. If you would rather avoid joints altogether, a Resin bound driveway built on the same robust sub-base is another surface worth considering for a heavily used drive.
Frequently Asked Questions
What thickness of block paving is required for heavy vehicles?
Thicker blocks carry more load than thinner ones, and 80mm blocks are the usual choice for driveways that see regular vehicle use. Block thickness is only one part of the design, though. The sub-base depth, the quality of the compaction and the bedding layer all decide whether the surface stays level under repeated loads. A site assessment will confirm which combination suits the vehicles that will use the surface.
Does block paving sink under the weight of heavy vans or lorries?
Block paving sinks or rutting most often when the ground beneath it is too weak for the load. Poor sub-base preparation, wet clay soils and inadequate drainage are the common causes. Where the base is properly built and the edges are restrained, block paving can carry light vans and many lorries without sinking. Occasional heavy use needs a different design from sustained heavy traffic, so it is worth discussing your vehicles before work starts.
Is 80mm block paving necessary for a residential driveway?
For a residential driveway where cars and light vans drive over the surface, 80mm blocks are commonly specified because they resist cracking and movement better than thinner blocks. Lighter pedestrian areas can use thinner paving. The right specification depends on how often and how heavily the driveway is used, along with the ground conditions. Ask for a written specification that states the block thickness and sub-base depth before you agree to the work.
Get in touch with KT Lake Paving and Landscaping for a free, no-obligation assessment of your driveway and ground conditions, backed by a 10-year product guarantee from Brett.



