
Last Updated: November 9, 2026
Quick Summary
Driveway edge restraints are the rigid kerbs, usually concrete or block, bedded into a compacted base that hold paving material tight and stop it spreading outward under load and weather. Without a solid kerb, a driveway is far more likely to sink or crack within a few winters.
- A proper kerb is bedded on a firm base, haunched with concrete and levelled along its full run.
- Kerbs left proud of the finished surface can let the edge shift.
- Resin bound edging must keep stone from fraying without blocking drainage on permeable systems.
- KT Lake Paving and Landscaping brings over 30 years of surfacing experience to Norfolk driveway projects.
Table of Contents
- Why Driveway Edge Restraints Matter More Than the Surface
- Driveway Edge Restraint Installation: What a Proper Kerb Looks Like
- Resin Bound Driveway Edging and Permeable Driveway Edging
- Frequently Asked Questions
Why Driveway Edge Restraints Matter More Than the Surface
Driveway edge restraints are the hidden structure that keeps every paved surface in place, and ignoring them is why so many driveways in Norfolk fail within a few winters. Over 30 years of surfacing work at KT Lake Paving and Landscaping shows the edge, not the topping, decides how long a drive lasts.
Resin, block paving and gravel can all spread outward under load and weather, so a proper kerb helps hold that material tight.
Skipping a solid edge restraint is the fastest route to a sunken, cracked drive. See how to fix a cracked driveway for warning signs and why driveway sub-base depth matters for depth.
Driveway Edge Restraint Installation: What a Proper Kerb Looks Like
Driveway edge restraint installation means bedding a rigid kerb, usually concrete or block, into a compacted base so its top sits flush with the finished surface.

A proper kerb is set on a firm bed, haunched with concrete and levelled along its full run, with the paving tucked tight against it. Shallow haunching, soft ground and kerbs left proud of the surface can each let the edge shift, so check the five common sub-base mistakes before any kerb goes down.
A proper kerb follows a few simple rules, and each part of the build has a job to do.
| Element | What it involves | Why it matters |
|---|---|---|
| Kerb material | Rigid kerb, usually concrete or block | Holds paving material tight |
| Bedding | Bedded into a compacted base | Keeps the edge from shifting |
| Top level | Sits flush with the finished surface | Kerbs left proud can let the edge shift |
| Haunching | Haunched with concrete | Shallow haunching can let the edge shift |
| Levelling | Levelled along its full run | Keeps the restraint true along the edge |
| Ground | Set on firm ground | Soft ground can let the edge shift |
| Paving fit | Paving tucked tight against the kerb | Stops material spreading outward |
Resin Bound Driveway Edging and Permeable Driveway Edging
Resin bound driveway edging uses the same rigid restraint principle, but the kerb must also suit water movement, while permeable driveway edging lets surface water drain away instead of pooling at the boundary.
A solid edge keeps resin bound stone from fraying and stops loose gravel migrating into borders, and on permeable systems the restraint must not block the drainage path.
For Norfolk homeowners weighing up resin, see the drainage benefits of permeable resin driveways and how permeable paving handles drainage. KT Lake Paving and Landscaping installs resin bound driveways, and a resin bound driveway installer can advise on the edging each project needs.
A driveway only performs as well as the edge holding it. If the kerbs around your Norfolk property are shifting or the surface is spreading, get the structure checked before the damage spreads. KT Lake Paving and Landscaping brings over 30 years of experience and Brett Approved Premier Installer status to resin bound and paved driveway projects, with a 10-year product guarantee from Brett. Free, no-obligation estimates and advice are available to help you start.
Frequently Asked Questions
What is the purpose of an edge restraint on a driveway?
An edge restraint holds the paving in place at the perimeter of the drive. Without it, the surface has nothing to push against, so it spreads outward under vehicle loads and the edges drop. A solid kerb also keeps the sub-base compacted and stops soil or grass creeping over the paving. On resin bound surfaces the edging is the visible border and the structural stop in one.
Can driveway edge restraints be used with permeable paving?
Yes, and they must be. Permeable driveway edging needs a restraint that is flush with the surface, not raised, so water can drain off the edge without ponding. The kerb itself should be laid on a solid concrete bed so it does not settle and open a gap. Get this wrong and the whole permeable system fails at the margins, even if the paving is laid correctly.
How can I tell if my driveway edging needs repair?
Look for kerbs that have dropped below the paving line, gaps between the edging and the drive, or paving that has started to spread at the corners. Cracks running along the edge and rocking kerbs are also warning signs. Driveway edging repair is usually quicker and cheaper than replacing a whole drive, so catch it early. A professional assessment can confirm whether a repair or a full re-lay is the right call.



