How to Fix a Cracked Driveway: Step-by-Step UK Guide

Fix a cracked driveway with this step-by-step UK guide. Diagnose the damage, pick the right filler and learn when to repair or replace. Get started today.

Last Updated: November 5, 2026

Quick Summary

To fix a cracked driveway, first diagnose the cause and width, then clean out all dirt, moss and loose grit before filling. Choose a filler by crack size, overfill slightly and smooth level, then keep traffic off until fully cured.

  • Hairline cracks under about 3mm are usually cosmetic, while wider cracks need proper filler.
  • Most failed DIY repairs are caused by dirt, moss and loose grit left in the crack.
  • Use a backer rod in deep cracks so the filler sits at the right level.
  • Overfill slightly and smooth level, because filler shrinks as it cures.
  • Driving or walking on a fresh repair too early is the most common cause of failure.

Table of Contents

Step 1: Diagnose the Crack Before You Fix Your Cracked Driveway

A cracked driveway is rarely just a surface problem. Before reaching for filler, work out what caused the crack and how serious it is, the step most homeowners skip, and why repairs fail within a season.

A crack that comes back usually has an untreated cause underneath.

  • How wide is the crack? Hairline cracks under about 3mm are usually cosmetic; anything wider than a pencil needs proper filler.
  • Is the ground around it moving? Slab edges at different heights mean the sub-base may be failing.
  • Is it a single crack or a network? One straight line points to a joint or settlement; a spiderweb pattern points to a weak mix or an overloaded surface.

Watch out: filling a crack over a sunken slab hides the symptom for a few months. The crack returns wider, and the repair costs more the second time.

If the slab is dropping, read why your driveway keeps sinking. If the damage is widespread, signs you need to replace your driveway will tell you whether repair is still worth the effort.

Step 2: Gather Your Driveway Crack Repair Tools and Prepare the Surface

Good preparation decides whether the repair lasts one winter or ten. Most failed DIY jobs are caused not by bad filler but by dirt, moss and loose grit left in the crack.

Homeowner using a wire brush to clean debris from a cracked driveway before applying repair filler
Homeowner using a wire brush to clean debris from a cracked driveway before applying repair filler
  • A stiff wire brush and a narrow screwdriver or chisel
  • A hammer for tapping out broken pieces
  • A vacuum or soft brush for fine dust
  • A sealant gun and a suitable crack filler
  • A backer rod for deeper cracks
  • A trowel or smoothing tool
  1. Break out any loose or crumbling concrete with the hammer and chisel.
  2. Scrape the crack walls with the wire brush to remove moss and old sealant.
  3. Vacuum out all dust and grit. Filler will not bond to a dirty surface.
  4. Check the depth. For deep cracks, push in a backer rod so the filler sits at the right level.

If the crack sits over a soft or hollow base, surface preparation will not be enough. How to prepare a driveway sub-base explains what a sound base looks like before any repair goes down.

Step 3: How to Repair Concrete Driveway Cracks

Filling the crack is the quick part. Doing it so it survives a Norfolk winter takes care over three details: the filler you choose, the level you fill to, and how long you leave it alone.

Get Started Today →

Choose your filler by crack size:

Crack Type Best Filler Why
Hairline, under 3mm Pourable concrete crack sealant Flows into narrow gaps
Medium, 3-10mm Polyurethane sealant Stays flexible as the slab moves
Wide or deep Patching compound or repair mortar Fills volume without shrinking
Crumbling edges Concrete mix with expanding cement Rebuilds lost structure
  1. Load the filler into the sealant gun and push the nozzle to the base of the crack.
  2. Fill in one steady pass, working from one end to the other.
  3. Slightly overfill, then smooth level with a trowel. Filler shrinks as it cures, so a flush fill ends up sunken.
  4. Leave it. Check the label for drying time and keep traffic off until it has fully cured.

Watch out: driving or walking on a fresh repair too early is the most common cause of a failed patch. Give it the full curing time even if it looks set.

For resin surfaces, see how to repair cracks in resin driveways. If the crack is too wide or the base has gone, a professional repair is safer, questions to ask before hiring a paving contractor covers what to check.

Not every crack needs a full replacement, and not every crack is safe to patch. A driveway in Norfolk faces wet winters, frost and clay-heavy ground, so a repair that ignores water ingress will not hold. If cracks keep returning in the same spot, the sub-base is usually the reason, and a well-prepared base is what prevents the joint movement that opens cracks in the first place.

Frequently Asked Questions

What is the best filler for driveway cracks?

The best filler depends on the surface. For concrete, use a patching compound or expanding cement for wider gaps. For tarmac, a polyurethane sealant or cold-lay tarmac repair compound works well. Always clean the crack and remove loose material first. A backer rod helps control depth on deep cracks. Choose a product rated for outdoor use and check the drying time before applying.

Can you repair a cracked tarmac driveway yourself?

Yes, small tarmac cracks are a straightforward DIY repair. Clean the crack with a wire brush, remove broken pieces and loose material, then apply a polyurethane sealant or cold-lay compound. Press it in firmly and smooth the finish. For cracks wider than a finger or areas that have sunk, call a professional. Water ingress through untreated cracks will worsen the damage over winter.

When is a driveway crack too large to repair?

A crack wider than about 20mm, or one that runs across the full width of the driveway, usually signals a structural problem. If the surface around the crack is uneven or has sunk, filling alone will not fix it. In these cases, a repair or replace cracked driveway decision should be made with a professional assessment. Patching over a failing base rarely lasts.


Cracked driveways are a symptom, not the whole story. KT Lake Paving and Landscaping offers free, no-obligation estimates across Norfolk, with no deposit required and a 10-year product guarantee from Brett. As a Brett Approved Premier Installer, the team installs resin bound and hot tar and chip surfacing to British Standards. Get started with KT Lake Paving and Landscaping and fix the cause, not just the crack.